Manuals and Tutorials

Only for STorM32 NT users. For setups with I2C-based camera IMU or firmware versions v0.xx and v1.xx go to [[1]].

Tutorial What is STorM32 NT about? Getting Started Tuning Recipe Configure the RC Input Hold versus Pan Mode Advanced Functions Video Tutorials Boards, Modules, and Vendors STorM32 Boards Overview of NT Modules Where to buy STorM32 boards Where to get NT Modules Where to buy accessories and supplies

Manuals Dos and Don'ts How to flash firmware Calibration Inputs and Functions Using a 2nd IMU STorM32 Scripts Using the DataDisplay NT Manuals How to flash NT Modules NT Data Logging NT Camera Evaluating Vibrations and Optimizing Damper Systems

Bits and Bobs How to install and use a joystick How to use 2 axis gimbals Gimbals with Integrated Landing Skids General Reference Manuals Leds Pins and Connectors Serial Communication Complete List of Parameters Bluetooth Module HC06 NT-specific Reference Manuals NT Pins and Connectors NT Bus Protocol Ensys NT Modules

---

White Papers Manually Setting the IMU Orientation

DIY How to order the electronic parts How to order print boards (PCBs) Electronic Parts for NT Modules

Recycle Bin Tuning Guide QuickStart Guide - old, v0.56 Getting Started - old, v0.56

I2C Error Compendium Serial Communication - old, v0.77e 6-Point Calibration - old

Quick Start Guide - old, v0.57e Serial Communication old

STorM32-ArduPilot