RS485, LVDS, and Alike

From STorM32-BGC Wiki
Revision as of 09:27, 3 September 2019 by OlliW (talk | contribs)
Jump to navigation Jump to search

The information on this page refers to firmware v2.43 and higher.

The STorM32 controller supports using RS485, Low Voltage Differential Signaling (LVDS), or other bus drivers for its NT bus.

For that purpose the NT modules provide two pins, one active high and one active low, which allow to enable/disable the respective transmit port drivers on the NT module.

Retrieved from "http:///storm32bgc-wiki/index.php?title=RS485,_LVDS,_and_Alike&oldid=8038"