3.3 V Fix Mod for STorM32 v1.31 Boards: Difference between revisions
(Created page with "The STorM32 v1.31 boards, which are distinguished by their on-board switching regulator, unfortunately provide a very weak 3.3 V power supply, which makes it problematic to us...") |
No edit summary |
||
Line 10: | Line 10: | ||
(3) Soldering of two wires to establish the connections. | (3) Soldering of two wires to establish the connections. | ||
:[[File:20170712 224001.jpg|480px]] | |||
https://static.rcgroups.net/forums/attachments/5/7/6/1/2/7/a10193141-141-_20170712_224001.jpg | https://static.rcgroups.net/forums/attachments/5/7/6/1/2/7/a10193141-141-_20170712_224001.jpg |
Revision as of 02:50, 13 July 2017
The STorM32 v1.31 boards, which are distinguished by their on-board switching regulator, unfortunately provide a very weak 3.3 V power supply, which makes it problematic to use NT modules. Therefore, usually extra BECs need to be used with these boards.
Rcgroups user ckambiselis has suggested a, relatively simple, mod to fix that issue. For the original post see [here].
It consists of three steps:
(1) Removal (desoldering) of the 3.3 V LDO regulator from board.
(2) Soldering of a stronger 3.3 V LDO regulator to the bottom of the board.
(3) Soldering of two wires to establish the connections.
https://static.rcgroups.net/forums/attachments/5/7/6/1/2/7/a10193141-141-_20170712_224001.jpg
https://static.rcgroups.net/forums/attachments/5/7/6/1/2/7/a10193142-89-DSC_0405.jpg
https://static.rcgroups.net/forums/attachments/5/7/6/1/2/7/a10193143-106-DSC_0406.jpg