Manuals and Tutorials

• Getting Started
• How to flash firmware
• Tunning Guide
• GUI (o323BGCTool) FAQ
• Leds
• Pins and Connectors
• Bluetooth Module HC06
• Which MPU modules do work with the board
• Where to buy accessories and supplies
• Where to buy assescories and supplies
• How to order the electronic parts
• How to order print boards (PCBs)

FAQ

1. Storing the parameter values to the EEPROM doesn't seem to work

Please double-check that the correct firmware for your board has been flashed. The problem typically happens then e.g. the firmware for a F103RB is flashed onto a board with a F103RC.

2. Flashing with the usb-ttl adapter produces Windows error messages

If upon flashing you get Windows errors such as mfc110.dll is missing, msvcr110.dll is missing, or application was unable to start correctly (0xc000007b), then you need to install the VC++ runtime libraries. Download vcredist_x64.exe or vcredist_x86.exe depending on your Win system from here, and run the exe file.

3. What connectors are used for connecting the MPU modules to the board?

The connectors for the MPU modules on the STorM32bgc board are Molex picoblade types with 1.25 mm pitch (for a comparison of various connectors see here). They are also known as micro JST 1.25 mm, and it is in fact best to search for this, e.g. on ebay: micro jst 1.25.