Which MPU modules do work with the board: Difference between revisions
(Created page with "The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU ...") |
No edit summary |
||
(16 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU modules and breakout boards are connected. | The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU modules and breakout boards are connected. | ||
Most of the cheap MPU modules/breakout boards are however "Arduino compatible", which means that they have a | Most of the cheap MPU modules/breakout boards are however "Arduino compatible", which means that they have a 5 V pin and can be supplied with voltages of 5 V and higher, thanks to an on-board voltage regulator. The question arises if these MPU modules do also work with the 3.3 V provided by the STorM32-BGC. The answer is: | ||
According to current experience any MPU module works fine with the STorM32 board. | According to current experience any MPU module works fine with the STorM32-BGC board. | ||
Specifically this inlcudes the GY- | Specifically this inlcudes the [https://www.google.de/search?q=mpu+module+gy-521&client=firefox-a&hs=C3C&rls=org.mozilla:de:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=20USU8jdMOS9ygPhpYGgDQ&ved=0CAoQ_AUoAg&biw=1349&bih=915 GY-521] module. However, also the xoodee module and even the [https://www.google.de/search?q=gy-86+10dof&client=firefox-a&hs=GPs&rls=org.mozilla:de:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=NUYSU6bTPMP8ywPXgoLgDg&ved=0CAoQ_AUoAg&biw=1349&bih=915 GY-86 10DOF] module have been in use. | ||
For more details see the rcgroups posts [http://www.rcgroups.com/forums/showpost.php?p=27321450&postcount=55 #55], [http://www.rcgroups.com/forums/showpost.php?p=27330700&postcount=59 #59]. | For more details see the rcgroups posts [http://www.rcgroups.com/forums/showpost.php?p=27321450&postcount=55 #55], [http://www.rcgroups.com/forums/showpost.php?p=27330700&postcount=59 #59]. | ||
If you have any further or other information please feel free to update this page. | If you have any further or other information please feel free to update this page. |
Latest revision as of 16:13, 12 July 2014
The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU modules and breakout boards are connected.
Most of the cheap MPU modules/breakout boards are however "Arduino compatible", which means that they have a 5 V pin and can be supplied with voltages of 5 V and higher, thanks to an on-board voltage regulator. The question arises if these MPU modules do also work with the 3.3 V provided by the STorM32-BGC. The answer is:
According to current experience any MPU module works fine with the STorM32-BGC board.
Specifically this inlcudes the GY-521 module. However, also the xoodee module and even the GY-86 10DOF module have been in use.
For more details see the rcgroups posts #55, #59.
If you have any further or other information please feel free to update this page.