How to build a T-STorM32 gimbal: Difference between revisions

From STorM32-BGC Wiki
Jump to navigation Jump to search
No edit summary
Line 17: Line 17:
== Ring Magnets ==
== Ring Magnets ==


Rcgroups user S.V.V. has provided a great write up of info on ring magnets and how to choose:
The ring magnets used for the encoder must be diametrically magnetized.
 
Also, experience shows that the ring magnet and encoder should be well aligned and centered. It will work if not, but the results will be just more consistent.
 
The clear gap between encoder housing and ring magnet obviously depends on the specific magnet and the encoder. One may have to experiment, but ca 5 mm for the TLE5012B encoder and a bit less for the AS5028A encoder are good starting values.
 
Rcgroups user S.V.V. has provided a great write up on info on ring magnets and how to choose:
https://www.rcgroups.com/forums/showthread.php?2838548-T-STorM32-The-best-STorM32-ever-%21/page48&perpage=50#post49566339
https://www.rcgroups.com/forums/showthread.php?2838548-T-STorM32-The-best-STorM32-ever-%21/page48&perpage=50#post49566339


Revision as of 10:22, 30 July 2022

please fill in with your documentation :)

momentarily, just some random stuff

AS5048A External Encoder Modules

As5048-module-pins.jpg

This module comes with many gimbal motors, e.g. the iPower GBM2804. The separation of the solder pads is ca. 0.85 mm.

As5048-ht2205-module-pins.jpg

This module comes e.g. with the HT2205 gimbal motors. The separation of the solder pads is 1 mm. One could solder a JST-SH connector to them.

Ring Magnets

The ring magnets used for the encoder must be diametrically magnetized.

Also, experience shows that the ring magnet and encoder should be well aligned and centered. It will work if not, but the results will be just more consistent.

The clear gap between encoder housing and ring magnet obviously depends on the specific magnet and the encoder. One may have to experiment, but ca 5 mm for the TLE5012B encoder and a bit less for the AS5028A encoder are good starting values.

Rcgroups user S.V.V. has provided a great write up on info on ring magnets and how to choose: https://www.rcgroups.com/forums/showthread.php?2838548-T-STorM32-The-best-STorM32-ever-%21/page48&perpage=50#post49566339

User Builds

buckker's:

hexakopter's:

Ogitrev's (only test setup):

Gapey's (only test setup):

Eenok_Farkwinder's:

noradtux's:

funth1ngs's:

ManuC's:

mike_kelly's (only test setup):

reffff's:

Steve2303's:

VovaN60's:

PistaJ's:

neokiller62's:

HammerFPV's (only test setup):

hvermeer's:

Sitas':

Retrieved from "http:///storm32bgc-wiki/index.php?title=How_to_build_a_T-STorM32_gimbal&oldid=10416"