Example Setups: Difference between revisions
(41 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
<div class="toclimit-3">__TOC__</div> | |||
< | <br> | ||
= Example Setups = | |||
In this section you can find example setups (mainly PID values) for some standard gimbals. | |||
== DYS Smart 3 Axis Gopro Gimbal == | |||
Gimbal: http://www.dys.hk/ProductShow.asp?ID=62 | |||
=== Settings === | |||
* GekoCH's: http://www.rcgroups.com/forums/showpost.php?p=30092104&postcount=2516 | |||
* wdaehn's: http://www.rcgroups.com/forums/showpost.php?p=30212877&postcount=2673 | |||
== Walkera G-3D 3 Axis Gimbal == | |||
Gimbal: http://www.walkera.com./en/showgoods.php?id=2215 | |||
=== Settings === | |||
* Tallyrver's: http://www.rcgroups.com/forums/showpost.php?p=32177445&postcount=595 | |||
== Goodluckbuy 3 Axis Gimbal (v2) == | |||
Gimbal: http://www.goodluckbuy.com/3-axis-brushless-gimbal-camera-mount-with-32bit-storm32-controller-for-gopro-3-4-fpv-black.html | |||
=== Settings === | |||
* Treeburner's: http://www.rcgroups.com/forums/showpost.php?p=32698855&postcount=2078, http://www.rcgroups.com/forums/showpost.php?p=32689980&postcount=2067 | |||
== RcMaster FPV 3-Axis Brushless Gimbal for Sony NEX5/6/7 == | |||
Gimbal: http://www.rcmaster.net/de-fpv-3-axis-brushless-gimbal-w-motor-f%C3%BCr-sony-nex5-6-7-p238234.htm | |||
=== Settings === | |||
* amadeus': http://fpv-community.de/showthread.php?60783-Wer-Kennt-dieses-Gimbal&p=854545&viewfull=1#post854545 | |||
<br> | |||
= User Setups = | |||
In this section you may describe and show your STorM32-based gimbal setup, '''including''' all relevant technical specifications (please try to adhere to the suggested list of technical infos). | |||
Please feel free to add your system here, the other users will appreciate it! | |||
== Keychain Camera Gimbals == | == Keychain Camera Gimbals == | ||
Line 21: | Line 55: | ||
== Mobius ActionCam Gimbals == | == Mobius ActionCam Gimbals == | ||
=== EagleEi 3-Axis Gimbal === | |||
[[File:EagleEi Gimbal 3axis.jpg|thumb|200px]] | |||
'''Technical details:''' | |||
* camera: Mobius | |||
* pitch motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001 | |||
* roll motor: Walkear G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001 | |||
* yaw motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001 | |||
* pitch PID values: P = 3.00, I = 280, D = 0.045, Vmax = 93 (f0=12.6Hz, d=0.42, t=5.6ms) | |||
* roll PID values: P = 3.40, I = 225, D = 0.050, Vmax = 108 (f0=10.7Hz, d=0.51, t=7.0ms) | |||
* yaw PID values: P = 4.60, I = 85, D = 0.055, Vmax = 126 (f0=6.3Hz, d=1.06, t=18.3ms) | |||
'''Project details:''' | |||
* home page: http://open-diy-projects.com | |||
* video: https://www.youtube.com/watch?v=sJdPNIIDpNc | |||
== GoPro Hero Gimbals == | == GoPro Hero Gimbals == | ||
Line 31: | Line 80: | ||
* pitch motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motor taken from this GLB gimbal] | * pitch motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motor taken from this GLB gimbal] | ||
* roll motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motors taken from this GLB gimbal] | * roll motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motors taken from this GLB gimbal] | ||
* yaw motor: [//www.rctimer.com/ | * yaw motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* battery: 3S | * battery: 3S | ||
* pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100 (f0=11.1Hz, d=0.67) | * pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100 (f0=11.1Hz, d=0.67) | ||
Line 37: | Line 86: | ||
* yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115 (f0=11.3Hz, d=1.00) | * yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115 (f0=11.3Hz, d=1.00) | ||
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package | * controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package | ||
=== careyer's SToRM-stick=== | |||
[[File:StorM-stick.JPG|thumb|200px]] | |||
'''Technical details:''' | |||
* camera: Gopro Hero 3 BE | |||
* pitch motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t | |||
* roll motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t | |||
* yaw motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t | |||
* battery: 3S | |||
<!--* typical pitch PID values: P = 5, I = 100, D = 0.0500, Vmax = 100 (f0=7.118Hz, d=1.180) | |||
* typical roll PID values: P = 5, I = 100, D = 0.0500, Vmax = 100 (f0=7.118Hz, d=1.180) | |||
* typical yaw PID values: P = 11, I = 100, D = 0.1250, Vmax = 125 (f0=4.502Hz, d=1.5556)--> | |||
* typical pitch PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100 (f0=7.12Hz, d=0.45) | |||
* typical roll PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100 (f0=7.12Hz, d=0.45) | |||
* typical yaw PID values: P = 11.0, I = 280, D = 0.200, Vmax = 100 (f0=5.96Hz, d=0.74) | |||
* controller board: STorM32bgc v1.2 FW 027d | |||
== Sony Nex Gimbals == | == Sony Nex Gimbals == | ||
Line 44: | Line 110: | ||
'''Technical details:''' | '''Technical details:''' | ||
* camera: Sony Nex 5n | * camera: Sony Nex 5n | ||
* pitch motor: [//www.rctimer.com/ | * pitch motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* roll motor: [//www.rctimer.com/ | * roll motor: [//www.rctimer.com/product-870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t | ||
* yaw motor: [//www.rctimer.com/ | * yaw motor: [//www.rctimer.com/product-870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t | ||
* battery: 3S | * battery: 3S | ||
* typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110 (f0=4.78Hz, d=0.37) | * typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110 (f0=4.78Hz, d=0.37) | ||
Line 58: | Line 124: | ||
'''Technical details:''' | '''Technical details:''' | ||
* camera: Sony Nex 5n | * camera: Sony Nex 5n | ||
* pitch motor: [//www.rctimer.com/ | * pitch motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* roll motor: [//www.rctimer.com/ | * roll motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* yaw motor: [//www.rctimer.com/ | * yaw motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* battery: 2S and 3S | * battery: 2S and 3S | ||
* 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175 (f0=11.7Hz, d=0.71) | * 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175 (f0=11.7Hz, d=0.71) | ||
Line 77: | Line 143: | ||
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package | * controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package | ||
=== wdaehn's RC Timer ASP === | |||
[[File:RCTimer ASP NEX Blue.jpg|thumb|200px]] | |||
'''Technical details:''' | |||
* camera: Sony Nex 5n with SEL-P1650 Lens | |||
* gimbal: [//www.rctimer.com/product-977.html rctimer ASP 3 axis Nex-GH5 brushless gimbal] | |||
* pitch motor: [//www.rctimer.com/product-901.html rctimer model BGM4108-015-130T], R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t | |||
* roll motor: [//www.rctimer.com/product-901.html rctimer model BGM4108-015-130T], R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t | |||
* yaw motor: [//www.rctimer.com/product-1124.html rctimer model BGM4114HS-017-100T], R: 15.2 Ohm, config: 24N22P, winding: 0.17mm, 100t | |||
* battery: 3S | |||
* typical pitch PID values: P = 9.30, I = 590.00, D = 0.0400, Vmax = 187 (f0=19.33Hz, d=0.9572) | |||
* typical roll PID values: P = 8.50, I = 240.00, D = 0.0700, Vmax = 230 (f0=9.319Hz, d=1.0369) | |||
* typical yaw PID values: P = 9.70, I = 170, D = 0.0700, Vmax = 140 (f0=8.843Hz, d=1.4059) <br>--- Please note, Yaw was not tuned much since it is not relevant for my cablecam --- | |||
* controller board: STorM32bgc v1.2, F103RC, TC's in SO08 package, Firmware v0.28 |
Latest revision as of 12:44, 17 September 2015
Example Setups
In this section you can find example setups (mainly PID values) for some standard gimbals.
DYS Smart 3 Axis Gopro Gimbal
Gimbal: http://www.dys.hk/ProductShow.asp?ID=62
Settings
- GekoCH's: http://www.rcgroups.com/forums/showpost.php?p=30092104&postcount=2516
- wdaehn's: http://www.rcgroups.com/forums/showpost.php?p=30212877&postcount=2673
Walkera G-3D 3 Axis Gimbal
Gimbal: http://www.walkera.com./en/showgoods.php?id=2215
Settings
Goodluckbuy 3 Axis Gimbal (v2)
Settings
- Treeburner's: http://www.rcgroups.com/forums/showpost.php?p=32698855&postcount=2078, http://www.rcgroups.com/forums/showpost.php?p=32689980&postcount=2067
RcMaster FPV 3-Axis Brushless Gimbal for Sony NEX5/6/7
Gimbal: http://www.rcmaster.net/de-fpv-3-axis-brushless-gimbal-w-motor-f%C3%BCr-sony-nex5-6-7-p238234.htm
Settings
- amadeus': http://fpv-community.de/showthread.php?60783-Wer-Kennt-dieses-Gimbal&p=854545&viewfull=1#post854545
User Setups
In this section you may describe and show your STorM32-based gimbal setup, including all relevant technical specifications (please try to adhere to the suggested list of technical infos).
Please feel free to add your system here, the other users will appreciate it!
Keychain Camera Gimbals
OlliW's
Technical details:
- camera: key cam 808 #16 V2 with lense D
- pitch motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- roll motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- yaw motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- battery: 3S
- typical pitch PID values: P = 6.0, I = 750, D = 0.070, Vmax = 150 (f0=15.9Hz, d=0.40)
- typical roll PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150 (f0=7.85Hz, d=0.38)
- typical yaw PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150 (f0=7.85Hz, d=0.38)
- controller board: this is a test gimbal, boards are varying
Mobius ActionCam Gimbals
EagleEi 3-Axis Gimbal
Technical details:
- camera: Mobius
- pitch motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
- roll motor: Walkear G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
- yaw motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
- pitch PID values: P = 3.00, I = 280, D = 0.045, Vmax = 93 (f0=12.6Hz, d=0.42, t=5.6ms)
- roll PID values: P = 3.40, I = 225, D = 0.050, Vmax = 108 (f0=10.7Hz, d=0.51, t=7.0ms)
- yaw PID values: P = 4.60, I = 85, D = 0.055, Vmax = 126 (f0=6.3Hz, d=1.06, t=18.3ms)
Project details:
- home page: http://open-diy-projects.com
- video: https://www.youtube.com/watch?v=sJdPNIIDpNc
GoPro Hero Gimbals
Hexakopter's
Technical details:
- camera: GoPro Hero 1
- pitch motor: motor taken from this GLB gimbal
- roll motor: motors taken from this GLB gimbal
- yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- battery: 3S
- pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100 (f0=11.1Hz, d=0.67)
- roll PID values: P = 7, I = 450, D = 0.1000, Vmax = 115 (f0=10.7Hz, d=0.52)
- yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115 (f0=11.3Hz, d=1.00)
- controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package
careyer's SToRM-stick
Technical details:
- camera: Gopro Hero 3 BE
- pitch motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
- roll motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
- yaw motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
- battery: 3S
- typical pitch PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100 (f0=7.12Hz, d=0.45)
- typical roll PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100 (f0=7.12Hz, d=0.45)
- typical yaw PID values: P = 11.0, I = 280, D = 0.200, Vmax = 100 (f0=5.96Hz, d=0.74)
- controller board: STorM32bgc v1.2 FW 027d
Sony Nex Gimbals
Erick's
Technical details:
- camera: Sony Nex 5n
- pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- roll motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
- yaw motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
- battery: 3S
- typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110 (f0=4.78Hz, d=0.37)
- typical roll PID values: P = 12, I = 250, D = 0.5000, Vmax = 160 (f0=3.56Hz, d=0.54)
- typical yaw PID values: P = 12, I = 150, D = 0.6000, Vmax = 155 (f0=2.52Hz, d=0.63)
- controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package
Hexakopter's
Technical details:
- camera: Sony Nex 5n
- pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- roll motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- battery: 2S and 3S
- 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175 (f0=11.7Hz, d=0.71)
- 2S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 190 (f0=6.92Hz, d=1.05)
- 2S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 215 (f0=4.86Hz, d=0.94)
Old 3S PID settings:
- 3S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax=115 (f0=11.7Hz, d=0.71)
- 3S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 130 (f0=6.92Hz, d=1.05)
- 3S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 135 (f0=4.86Hz, d=0.94)
New 3S PID settings:
- 3S pitch PID values: P = 11.0, I = 340, D = 0.1150, Vmax=110 (f0=8.65Hz, d=0.88)
- 3S roll PID values: P = 12,3 I = 300, D = 0.2550, Vmax = 111 (f0=5.46Hz, d=0.70)
- 3S yaw PID values: P = 12.0, I = 365, D = 0.4000, Vmax = 111 (f0=4.81Hz, d=0.50)
- controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package
wdaehn's RC Timer ASP
Technical details:
- camera: Sony Nex 5n with SEL-P1650 Lens
- gimbal: rctimer ASP 3 axis Nex-GH5 brushless gimbal
- pitch motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
- roll motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
- yaw motor: rctimer model BGM4114HS-017-100T, R: 15.2 Ohm, config: 24N22P, winding: 0.17mm, 100t
- battery: 3S
- typical pitch PID values: P = 9.30, I = 590.00, D = 0.0400, Vmax = 187 (f0=19.33Hz, d=0.9572)
- typical roll PID values: P = 8.50, I = 240.00, D = 0.0700, Vmax = 230 (f0=9.319Hz, d=1.0369)
- typical yaw PID values: P = 9.70, I = 170, D = 0.0700, Vmax = 140 (f0=8.843Hz, d=1.4059)
--- Please note, Yaw was not tuned much since it is not relevant for my cablecam --- - controller board: STorM32bgc v1.2, F103RC, TC's in SO08 package, Firmware v0.28