Which MPU modules do work with the board: Difference between revisions
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
Mpu Placement | Mpu Placement | ||
[[File: | [[File:Mpu1.jpg]] | ||
Revision as of 23:17, 13 April 2014
The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU modules and breakout boards are connected.
Most of the cheap MPU modules/breakout boards are however "Arduino compatible", which means that they have a 5V pin and can be supplied with voltages of 5 V and higher, thanks to an on-board voltage regulator. The question arises if these MPU modules do also work with the 3.3 V provided by the STorM32-BGC. The answer is:
According to current experience any MPU module works fine with the STorM32 board.
Specifically this inlcudes the GY-521 module. However, also the xoodee module and even the GY-86 10DOF module have been in use.
For more details see the rcgroups posts #55, #59.
If you have any further or other information please feel free to update this page.
Mpu Placement File:Mpu1.jpg
