How to configure CP2102 USB adapters for high baud rates: Difference between revisions
Jump to navigation
Jump to search
m (OlliW moved page How-to configure CP2102 to 2000000 baud rate to How to configure CP2102 USB adapters for high baud rates) |
No edit summary |
||
Line 1: | Line 1: | ||
CP210x | USB adapters with CP210x chip sets allow only for 32 fixed UART baud rates with a maximum of 115200 bps as default. This is perfectly fine for most applications, but not for using the CP210x USB adapters in connection with the STorM32 NT bus. To that end, the CP210x chip needs to be reconfigured, to enable high baudrates, such as 2000000 bps. The procedure is described in the following. | ||
== Configuration Procedure == | == Configuration Procedure == |
Revision as of 13:36, 31 October 2015
USB adapters with CP210x chip sets allow only for 32 fixed UART baud rates with a maximum of 115200 bps as default. This is perfectly fine for most applications, but not for using the CP210x USB adapters in connection with the STorM32 NT bus. To that end, the CP210x chip needs to be reconfigured, to enable high baudrates, such as 2000000 bps. The procedure is described in the following.
Configuration Procedure
1. Run CP21xxCustomizationUtility from AN721SW
2. Select your device from list if it is not selected
3. Expand Baud Rate Alias
4. Set both upper ranges (1474561-2457600 and 2457601-xxxxxxxxx) to 2000000 and click "Program Device"
5. You should see columns turned green upon completion