Boards: Difference between revisions

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
No edit summary
No edit summary
Line 14: Line 14:
* MCU: STM32F103RC
* MCU: STM32F103RC


Comment: The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port.
'''Comment:''' The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port.




Line 22: Line 22:
* MCU: STM32F103RB
* MCU: STM32F103RB


Comment: The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely:
'''Comment:''' The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely:

Revision as of 16:51, 20 February 2014

Currently, three different versions of STorM32-BGC boards are around.


Comment: The boards can in principle be populated with different microcontrollers, but below the "typical" configuration is mentioned.


STorM32-BGC v1.2

  • MCU: STM32F103RC


STorM32-BGC v1.1

  • MCU: STM32F103RC

Comment: The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port.


STorM32-BGC v0.17/v1.0

  • MCU: STM32F103RB

Comment: The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely: