Boards: Difference between revisions

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
No edit summary
Line 4: Line 4:
'''Comments:'''
'''Comments:'''
* The boards can in principle be populated with different microcontrollers; the "typical" configuration is a STM32F103RC.
* The boards can in principle be populated with different microcontrollers; the "typical" configuration is a STM32F103RC.
* To avoid confusion/missunderstandings please note: The boards provide many features hardware-wise, but not all are currently supported by the firmware.
* To avoid confusion/missunderstandings please note: The boards provide many features hardware-wise, but not all are yet supported by the firmware.


== STorM32-BGC v1.3 ==
== STorM32-BGC v1.3 ==
Line 26: Line 26:
* supply voltage: 6 - 18 V or 2 - 4S
* supply voltage: 6 - 18 V or 2 - 4S
* motor current: max. 1.5 A per motor<br/> comment: this is not yet fully exploited and depends also on the motor driver package (SOIC or DFN); for DFN packages, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S, it is expected that also motors with 10 Ohm or larger are handled well (for more details see [//www.rcgroups.com/forums/showthread.php?t=2055844&page=2&pp=50#post27515444 here] and [//www.rcgroups.com/forums/showthread.php?t=2055844&page=15&pp=50#post28578479 here]).
* motor current: max. 1.5 A per motor<br/> comment: this is not yet fully exploited and depends also on the motor driver package (SOIC or DFN); for DFN packages, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S, it is expected that also motors with 10 Ohm or larger are handled well (for more details see [//www.rcgroups.com/forums/showthread.php?t=2055844&page=2&pp=50#post27515444 here] and [//www.rcgroups.com/forums/showthread.php?t=2055844&page=15&pp=50#post28578479 here]).
* board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm
|}
|}


Revision as of 06:36, 26 June 2014

At present, three different versions of STorM32-BGC boards are in use (v0.17/v1.0 boards are deprecated).


Comments:

  • The boards can in principle be populated with different microcontrollers; the "typical" configuration is a STM32F103RC.
  • To avoid confusion/missunderstandings please note: The boards provide many features hardware-wise, but not all are yet supported by the firmware.

STorM32-BGC v1.3

STorM32 BGC board v1.3 with motor drivers in SOIC package
  • MCU: STM32F103RC at 72 MHz
  • motor drivers: TC4452VMF
  • on-board Bluetooth (optional)
  • on-board 6DOF IMU (MPU6050)
  • IR led
  • Futaba S-Bus
  • Spektrum satellite
  • up to seven PWM/Sum-PPM inputs/outputs
  • joystick ports for all three axes
  • additional I2C port (I2C#2)
  • 3 auxiliary ports
  • BUT port
  • supply voltage: 6 - 18 V or 2 - 4S
  • motor current: max. 1.5 A per motor
    comment: this is not yet fully exploited and depends also on the motor driver package (SOIC or DFN); for DFN packages, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S, it is expected that also motors with 10 Ohm or larger are handled well (for more details see here and here).
  • board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm

STorM32-BGC v1.2

STorM32 BGC board v1.2 with motor drivers in DFN package

Differences to the v1.3 board:

  • voltage regulator: smaller SOT223 package
  • only 2 auxiliary ports

STorM32-BGC v1.1

STorM32 BGC board v1.1 with motor drivers in SOIC package

Differences to the v1.2 board:

  • no Futaba S-bus support
  • Spektrum satellite is supported, but no extra Spektrum connector on board
  • no extra USB voltage protection diode
  • voltage regulator: smaller SOT223 package
  • only 2 auxiliary ports

Comment: The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port.


Retrieved from "http:///storm32bgc-v1-wiki/index.php?title=Boards&oldid=1331"