Which MPU modules do work with the board: Difference between revisions

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
(Created page with "The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU ...")
 
No edit summary
Line 5: Line 5:
According to current experience any MPU module works fine with the STorM32 board.
According to current experience any MPU module works fine with the STorM32 board.


Specifically this inlcudes the GY-81 module. However, also the xoodee module and even the GY-86 module have been in use.
Specifically this inlcudes the [https://www.google.de/search?q=mpu+module+gy-521&client=firefox-a&hs=C3C&rls=org.mozilla:de:official&channel=sb&source=lnms&tbm=isch&sa=X&ei=20USU8jdMOS9ygPhpYGgDQ&ved=0CAoQ_AUoAg&biw=1349&bih=915 GY-521] module. However, also the xoodee module and even the GY-86 10DOF module have been in use.


For more details see the rcgroups posts [http://www.rcgroups.com/forums/showpost.php?p=27321450&postcount=55 #55], [http://www.rcgroups.com/forums/showpost.php?p=27330700&postcount=59 #59].  
For more details see the rcgroups posts [http://www.rcgroups.com/forums/showpost.php?p=27321450&postcount=55 #55], [http://www.rcgroups.com/forums/showpost.php?p=27330700&postcount=59 #59].  


If you have any further or other information please feel free to update this page.
If you have any further or other information please feel free to update this page.

Revision as of 21:41, 1 March 2014

The STorM32-BGC works internally with a voltage of 3.3 V. Accordingly, it also provides (only) 3.3 V at its ports, which includes the I2C or I2C#2 ports to which external MPU modules and breakout boards are connected.

Most of the cheap MPU modules/breakout boards are however "Arduino compatible", which means that they have a 5V pin and can be supplied with voltages of 5 V and higher, thanks to an on-board voltage regulator. The question arises if these MPU modules do also work with the 3.3 V provided by the STorM32-BGC. The Answer is:

According to current experience any MPU module works fine with the STorM32 board.

Specifically this inlcudes the GY-521 module. However, also the xoodee module and even the GY-86 10DOF module have been in use.

For more details see the rcgroups posts #55, #59.

If you have any further or other information please feel free to update this page.