http://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&feed=atom&action=historyI2C Error Compendium - Revision history2024-03-29T01:53:02ZRevision history for this page on the wikiMediaWiki 1.39.1http://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=3149&oldid=prevOlliW at 07:17, 29 July 20172017-07-29T07:17:15Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:17, 29 July 2017</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>In the STorM32's GUI, you can find I2C errors <del style="font-weight: bold; text-decoration: none;">recorded </del>in the Data Display window, which can be <del style="font-weight: bold; text-decoration: none;">found </del>by clicking on the {{GUI|Data Display}} button near the bottom of the GUI.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In the STorM32's GUI, you can find I2C errors <ins style="font-weight: bold; text-decoration: none;">displayed in the {{GUI|Dashboard}} tab, the status bar at the bottom of the main window, or </ins>in the Data Display window, which can be <ins style="font-weight: bold; text-decoration: none;">opened </ins>by clicking on the {{GUI|Data Display}} button near the bottom of the GUI.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-3133:rev-3149 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=3133&oldid=prevOlliW: /* Ways to Reduce the I2C Error Rate */2016-03-22T17:01:39Z<p><span dir="auto"><span class="autocomment">Ways to Reduce the I2C Error Rate</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:01, 22 March 2016</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l33">Line 33:</td>
<td colspan="2" class="diff-lineno">Line 33:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* add I2C hardening electronics</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* add I2C hardening electronics</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [<del style="font-weight: bold; text-decoration: none;">[</del>STorM32 NT <del style="font-weight: bold; text-decoration: none;">Manuals|STorM32 NT]</del>], which would be the ultimative solution</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [<ins style="font-weight: bold; text-decoration: none;">http://www.olliw.eu/storm32bgc-wiki/Main_Page </ins>STorM32<ins style="font-weight: bold; text-decoration: none;">-</ins>NT], which would be the ultimative solution</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2964:rev-3133 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2964&oldid=prevOlliW: /* Ways to Reduce the I2C Error Rate */2015-11-15T17:10:17Z<p><span dir="auto"><span class="autocomment">Ways to Reduce the I2C Error Rate</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:10, 15 November 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l33">Line 33:</td>
<td colspan="2" class="diff-lineno">Line 33:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* add I2C hardening electronics</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* add I2C hardening electronics</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [[STorM32 NT Manuals|STorM32 NT]]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [[STorM32 NT Manuals|STorM32 NT]]<ins style="font-weight: bold; text-decoration: none;">, which would be the ultimative solution</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td></tr>
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2963&oldid=prevOlliW: /* Practical Implications */2015-11-15T17:09:02Z<p><span dir="auto"><span class="autocomment">Practical Implications</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:09, 15 November 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l67">Line 67:</td>
<td colspan="2" class="diff-lineno">Line 67:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The probably most simple approach to avoid I2C errors is to lower the voltage, e.g. to run the controller/motors with 2S instead of 3S. This can be very effective, but can come at the cost of low motor torque, and some STorM32 boards do not run with 2S.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The probably most simple approach to avoid I2C errors is to lower the voltage, e.g. to run the controller/motors with 2S instead of 3S. This can be very effective, but can come at the cost of low motor torque, and some STorM32 boards do not run with 2S.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The alert reader will have noticed that increasing the current in the I2C lines or decreasing the pullup resistors, respectively, helps to diminish both the effects of the capacitive load and induced voltage disturbances. This in fact helps quite considerably, and it is a good idea to use small pullup resistors, e.g. 1k to 2k on the IMU module. One may wonder why not use really small pullup resistors instead of the typical 2k to 10k range. Well, the answer is that the common I2C drivers are not designed to handle currents larger than a few mA (and this in turn is related to the way in which I2C works). Therefore if very small pullup resistors are used this may damage your electronics. Circuitry exists to create low-impedance I2C communications, but it is not used in our low-budget applications.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The alert reader will have noticed that increasing the current in the I2C lines or decreasing the pullup resistors, respectively, helps to diminish both the effects of the capacitive load and induced voltage disturbances. This in fact helps quite considerably, and it is a good idea to use small pullup resistors, e.g. 1k to 2k on the IMU module. One may wonder why not use really small pullup resistors instead of the typical 2k to 10k range. Well, the answer is that the common I2C drivers are not designed to handle currents larger than a few mA (and this in turn is related to the way in which I2C works). Therefore if very small pullup resistors are used this may damage your electronics. Circuitry exists to create low-impedance I2C communications<ins style="font-weight: bold; text-decoration: none;">, which can be added to the I2C wiring and may help significantly</ins>, but it is not used in our low-budget applications.</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2962:rev-2963 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2962&oldid=prevOlliW: /* Ways to Reduce the I2C Error Rate */2015-11-15T17:06:50Z<p><span dir="auto"><span class="autocomment">Ways to Reduce the I2C Error Rate</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 18:06, 15 November 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l30">Line 30:</td>
<td colspan="2" class="diff-lineno">Line 30:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* reduce the I2C pullup resistors on the IMU module</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* reduce the I2C pullup resistors on the IMU module</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* add I2C hardening electronics</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [[STorM32 NT Manuals|STorM32 NT]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* ditch I2C and use [[STorM32 NT Manuals|STorM32 NT]]</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2958:rev-2962 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2958&oldid=prevOlliW: /* Practical Implications */2015-11-13T10:35:26Z<p><span dir="auto"><span class="autocomment">Practical Implications</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 11:35, 13 November 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l62">Line 62:</td>
<td colspan="2" class="diff-lineno">Line 62:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Ferrite rings are very commonly used to suppress I2C errors. When placed on the motor wires they reduce the slew rate of the motor signals and thereby their ability to induce fault voltages in the I2C lines. When placed on the I2C lines they can compensate, to some degree, the capacitive load and thereby improve the I2C signal quality.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Ferrite rings are very commonly used to suppress I2C errors. When placed on the motor wires they reduce the slew rate of the motor signals and thereby their ability to induce fault voltages in the I2C lines. When placed on the I2C lines they can compensate, to some degree, the capacitive load and thereby improve the I2C signal quality.</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The probably most simple approach to avoid I2C errors is to lower the voltage, e.g. to run the controller/motors with 2S instead of 3S. This can be very effective, but can come at the cost of low motor torque, and some STorM32 boards do not run with 2S.</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The alert reader will have noticed that increasing the current in the I2C lines or decreasing the pullup resistors, respectively, helps to diminish both the effects of the capacitive load and induced voltage disturbances. This in fact helps quite considerably, and it is a good idea to use small pullup resistors, e.g. 1k to 2k on the IMU module. One may wonder why not use really small pullup resistors instead of the typical 2k to 10k range. Well, the answer is that the common I2C drivers are not designed to handle currents larger than a few mA (and this in turn is related to the way in which I2C works). Therefore if very small pullup resistors are used this may damage your electronics. Circuitry exists to create low-impedance I2C communications, but it is not used in our low-budget applications.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The alert reader will have noticed that increasing the current in the I2C lines or decreasing the pullup resistors, respectively, helps to diminish both the effects of the capacitive load and induced voltage disturbances. This in fact helps quite considerably, and it is a good idea to use small pullup resistors, e.g. 1k to 2k on the IMU module. One may wonder why not use really small pullup resistors instead of the typical 2k to 10k range. Well, the answer is that the common I2C drivers are not designed to handle currents larger than a few mA (and this in turn is related to the way in which I2C works). Therefore if very small pullup resistors are used this may damage your electronics. Circuitry exists to create low-impedance I2C communications, but it is not used in our low-budget applications.</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2755:rev-2958 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2755&oldid=prevOlliW: /* Ways to Reduce the I2C Error Rate */2015-09-30T09:28:00Z<p><span dir="auto"><span class="autocomment">Ways to Reduce the I2C Error Rate</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 10:28, 30 September 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l30">Line 30:</td>
<td colspan="2" class="diff-lineno">Line 30:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* reduce the I2C pullup resistors on the IMU module</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* reduce the I2C pullup resistors on the IMU module</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* ditch I2C and use [[STorM32 NT Manuals|STorM32 NT]]</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Capacitive Load ==</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2695:rev-2755 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2695&oldid=prevOlliW: /* Ways to Reduce the I2C Error Rate */2015-08-23T07:14:33Z<p><span dir="auto"><span class="autocomment">Ways to Reduce the I2C Error Rate</span></span></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:14, 23 August 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l21">Line 21:</td>
<td colspan="2" class="diff-lineno">Line 21:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* increase spacing between I2C cables and motor wires</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* increase spacing between I2C cables and motor wires</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* twist the I2C wires; this can <del style="font-weight: bold; text-decoration: none;">take several forms</del>, <del style="font-weight: bold; text-decoration: none;">such as </del>twisting all four together, just twisting SCL and SDL, twisting SCL with GND and SDA with VCC etc.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* twist the I2C wires; this can <ins style="font-weight: bold; text-decoration: none;">be done in various ways</ins>, <ins style="font-weight: bold; text-decoration: none;">e.g. </ins>twisting all four <ins style="font-weight: bold; text-decoration: none;">wires </ins>together, just twisting SCL and SDL, twisting SCL with GND and SDA with VCC<ins style="font-weight: bold; text-decoration: none;">, </ins>etc.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* shield the I2C wires; using e.g. a coax cable or wrapping the wires with a self adhesive conductive cloth, "EMI shielding"</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* shield the I2C wires; using e.g. a coax cable or wrapping the wires with a self adhesive conductive cloth, "EMI shielding" <ins style="font-weight: bold; text-decoration: none;">(where the shield must be grounded to be effective)</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* lower the (motor) voltage </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* lower the (motor) voltage </div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2309:rev-2695 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2309&oldid=prevOlliW at 08:09, 30 March 20152015-03-30T08:09:09Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 09:09, 30 March 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">You </del>can find I2C errors recorded in the <del style="font-weight: bold; text-decoration: none;">"</del>Data Display<del style="font-weight: bold; text-decoration: none;">" </del>window, which can be found by clicking on the <del style="font-weight: bold; text-decoration: none;">"</del>Data Display<del style="font-weight: bold; text-decoration: none;">" </del>button near the bottom of the GUI.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">In the STorM32's GUI, you </ins>can find I2C errors recorded in the Data Display window, which can be found by clicking on the <ins style="font-weight: bold; text-decoration: none;">{{GUI|</ins>Data Display<ins style="font-weight: bold; text-decoration: none;">}} </ins>button near the bottom of the GUI.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2308:rev-2309 -->
</table>OlliWhttp://www.olliw.eu/storm32bgc-v1-wiki/index.php?title=I2C_Error_Compendium&diff=2308&oldid=prevKatman at 23:39, 29 March 20152015-03-29T23:39:19Z<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:39, 30 March 2015</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l10">Line 10:</td>
<td colspan="2" class="diff-lineno">Line 10:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>It's like a glass of wine: When it's full, it's full. It doesn't matter whether it was filled with Bordeaux, Chianti, or any other mixture. When the glass contains only a tiny bit of Bordeaux, one can add a lot of Chianti before it overflows, but when the glass is nearly full of Bordeaux, only a tiny amount of Chianti will fit before it reaches the overflow point. So, its not possible to tell how much Chianti is acceptable, since this depends on how much Bordeaux is already in the glass, the only thing that can be determined is that the more Chianti you poor in the glass the more likely it will overflow.</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">You can find I2C errors recorded in the "Data Display" window, which can be found by clicking on the "Data Display" button near the bottom of the GUI.</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Ways to Reduce the I2C Error Rate ==</div></td></tr>
<!-- diff cache key 59361m48173_6-storm32bgcmediawikki_:diff::1.12:old-2000:rev-2308 -->
</table>Katman