Example Setups: Difference between revisions

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
mNo edit summary
Line 95: Line 95:
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package


=== Yang's RC Timer ASP ===
=== wdaehn's RC Timer ASP ===
[[File:RCTimer ASP NEX Blue.jpg|thumb|200px]]
[[File:RCTimer ASP NEX Blue.jpg|thumb|200px]]



Revision as of 20:31, 13 June 2014

On this page you may describe and show your STorM32-based gimbal setup, including all relevant technical specifications (please try to adhere to the suggested list of technical infos).

Keychain Camera Gimbals

OlliW's

Storm32-bgc-v017-test-microgimbal-01-wp01.jpg

Technical details:

  • camera: key cam 808 #16 V2 with lense D
  • pitch motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • roll motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • yaw motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • battery: 3S
  • typical pitch PID values: P = 6.0, I = 750, D = 0.070, Vmax = 150    (f0=15.9Hz, d=0.40)
  • typical roll PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150    (f0=7.85Hz, d=0.38)
  • typical yaw PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150    (f0=7.85Hz, d=0.38)
  • controller board: this is a test gimbal, boards are varying

Mobius ActionCam Gimbals

GoPro Hero Gimbals

Hexakopter's

Hexakopter's GoPro-Gimbal.jpg

Technical details:

  • camera: GoPro Hero 1
  • pitch motor: motor taken from this GLB gimbal
  • roll motor: motors taken from this GLB gimbal
  • yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • battery: 3S
  • pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100    (f0=11.1Hz, d=0.67)
  • roll PID values: P = 7, I = 450, D = 0.1000, Vmax = 115    (f0=10.7Hz, d=0.52)
  • yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115    (f0=11.3Hz, d=1.00)
  • controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package

careyer's StorM-stick

StorM-stick.JPG

Technical details:

  • camera: Gopro Hero 3 BE
  • pitch motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • roll motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • yaw motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • battery: 3S
  • typical pitch PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100    (f0=7.12Hz, d=0.45)
  • typical roll PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100    (f0=7.12Hz, d=0.45)
  • typical yaw PID values: P = 11.0, I = 280, D = 0.200, Vmax = 100    (f0=5.96Hz, d=0.74)
  • controller board: STorM32bgc v1.2 FW 027d

Sony Nex Gimbals

Erick's

Technical details:

  • camera: Sony Nex 5n
  • pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • roll motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
  • yaw motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
  • battery: 3S
  • typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110    (f0=4.78Hz, d=0.37)
  • typical roll PID values: P = 12, I = 250, D = 0.5000, Vmax = 160    (f0=3.56Hz, d=0.54)
  • typical yaw PID values: P = 12, I = 150, D = 0.6000, Vmax = 155    (f0=2.52Hz, d=0.63)
  • controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package

Hexakopter's

Hexakopter's Sony Nex5n-Gimbal.jpg

Technical details:

  • camera: Sony Nex 5n
  • pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • roll motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • battery: 2S and 3S
  • 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175    (f0=11.7Hz, d=0.71)
  • 2S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 190    (f0=6.92Hz, d=1.05)
  • 2S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 215    (f0=4.86Hz, d=0.94)

Old 3S PID settings:

  • 3S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax=115    (f0=11.7Hz, d=0.71)
  • 3S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 130    (f0=6.92Hz, d=1.05)
  • 3S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 135    (f0=4.86Hz, d=0.94)

New 3S PID settings:

  • 3S pitch PID values: P = 11.0, I = 340, D = 0.1150, Vmax=110    (f0=8.65Hz, d=0.88)
  • 3S roll PID values: P = 12,3 I = 300, D = 0.2550, Vmax = 111    (f0=5.46Hz, d=0.70)
  • 3S yaw PID values: P = 12.0, I = 365, D = 0.4000, Vmax = 111    (f0=4.81Hz, d=0.50)
  • controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package

wdaehn's RC Timer ASP

RCTimer ASP NEX Blue.jpg

Technical details:

  • camera: Sony Nex 5n with SEL-P1650 Lens
  • gimbal: rctimer ASP 3 axis Nex-GH5 brushless gimbal
  • pitch motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
  • roll motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
  • yaw motor: rctimer model BGM4114HS-017-100T, R: 15.2 Ohm, config: 24N22P, winding: 0.17mm, 100t
  • battery: 3S
  • typical pitch PID values: P = 8.90, I = 600.00, D = 0.0400, Vmax = 187    (f0=15.92Hz, d=1.5333)
  • typical roll PID values: P = 8.50, I = 240.00, D = 0.0700, Vmax = 230    (f0=9.319Hz, d=1.0369)
  • typical yaw PID values: P = 9.70, I = 170, D = 0.0700, Vmax = 140    (f0=8.843Hz, d=1.4059)
  • controller board: STorM32bgc v1.2, F103RC, TC's in SO08 package, Firmware v0.28