Docu for witespy board(s)

From STorM32-BGC Wiki V1
Revision as of 17:01, 12 July 2014 by OlliW (talk | contribs)
Jump to navigation Jump to search

This page provides documentation for the STorM32-BGC board sold by Witespy - Ready To Fly Quads.

Dos and Don'ts

Please read the tutorial's Dos and Don'ts.

Shop Link

http://witespyquad.gostorego.com/flight-controllers/storm32-bgc-3-axis-stm32-brushless-gimbal-controller.html

Board Configuration

  • board version: v1.1
  • board color: blue
  • motor drivers in DFN packages: yes
  • on-board MPU: yes
  • on-board bluetooth module: no
  • I2C plug type: picoblade (1.25mm JST)
  • I2C#2 plug type: picoblade (1.25mm JST)
  • pin headers: no
  • further: diode for bluetooth module not populated

included accessories:

  • MPU module
  • cable with connectors for MPU module

Pins and Connections

Stom32-bgc-witespy-ports-and-connections-01.jpg

Flashing Firmware

Follow the instructions for v1.1 boards in the How to flash firmware manual.

Stom32-bgc-witespy-flashing-w-usbttladapter-connections-01.jpg