Docu for Gimbal24 board(s): Difference between revisions

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
== Dos and Don'ts ==
== Dos and Don'ts ==


Please read the tutorial's [[Getting Started#Dos and Don'ts|Dos and Don'ts]].  
Please read the tutorial's [[Dos and Don'ts]].  


== Shop Link ==  
== Shop Link ==  
Line 18: Line 18:
* I2C#2 plug type: picoblade (1.25mm JST)
* I2C#2 plug type: picoblade (1.25mm JST)
* pin headers: no
* pin headers: no
comes flashed with latest firmware and with configured bluetooth module


in addition to the board one needs to get a IMU module plus cable for the camera
Included accessories:
* none
 
Points to note:
* comes flashed with latest firmware and with configured bluetooth module
* in addition to the board one needs to get a IMU module plus cable&plug (camera IMU)


== Specifications ==
== Specifications ==

Latest revision as of 19:54, 8 January 2015

This page provides documentation for the STorM32-BGC board sold by Gimbal24.

Dos and Don'ts

Please read the tutorial's Dos and Don'ts.

Shop Link

http://www.gimbal24.de

Board Configuration

  • board version: v1.3
  • board color: black
  • motor drivers in DFN packages: yes
  • on-board MPU: yes
  • on-board bluetooth module: yes
  • I2C plug type: picoblade (1.25mm JST)
  • I2C#2 plug type: picoblade (1.25mm JST)
  • pin headers: no

Included accessories:

  • none

Points to note:

  • comes flashed with latest firmware and with configured bluetooth module
  • in addition to the board one needs to get a IMU module plus cable&plug (camera IMU)

Specifications

  • supply voltage: 6 - 18 V or 2 - 4S
  • motor current: max. 1.5 A per motor
    Comment: This is not yet fully exploited, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S (see here, here), motors with 10 Ohm may be handled with care (see here and here).
  • board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm

Pins and Connectors

Stom32-bgc-gimbal24-ports-and-connections-02.jpg

Flashing Firmware

Follow the instructions for v1.3 boards in the How to flash firmware manual.

Stom32-bgc-gimbal24-flashing-w-usbttladapter-connections-01.jpg