Bluetooth Module HC06

From STorM32-BGC Wiki V1
Jump to navigation Jump to search
STorM32 BGC v0.17 board with HC06 bluetooth module

The STorM32-BGC can be equipped with a Bluetooth module for wireless communication. Specifically, it is the HC06 slave module.

Yellow Status Led

There is also a third yellow led on the STorM32BGC board, which is related to the HC06 bluetooth module. Hence, its meaning has to be read off from the documentation for the HC06 module.

Installation and Configuration

In order to use the StorM32 BGC via Bluetooth just solder the HC06 BT-Module in place, connect via USB and start the "BTConfigureTool - Configure Bluetooth Module" option from the Tools menu in OlliW's o323BGCTool.

Once the module has been configured, please restart the board by pressing reset or remove and resume power. Then try to connect via Bluetooth - for those who wonder what the correct PIN is: It is "1234"

Where to get the HC06 module from

Search for "HC06" and check that it is a slave (it sometimes is available also as master). In case of doubt carefully compare the product picture with the item in the above picture.

See the wiki entry Where_to_buy_assescories_and_supplies: HC06_Bluetooth_module